MozTW 討論區 https://forum.moztw.org/ |
|
Mouseless Browsing 0.4 試譯 https://forum.moztw.org/viewtopic.php?f=11&t=12938 |
第 1 頁 (共 1 頁) |
發表人: | froce [ 2006-02-19, 23:18 ] |
文章主題 : | Mouseless Browsing 0.4 試譯 |
下面是Mouseless Browsing 0.4的中文試譯版... 很好用的東西...XD 目前有問題的功能我沒翻譯出來... 有興趣也知道那是啥東西的人請幫我翻譯出來... Pixels to scroll when pressing shortcuts Toggling visibility of ids on/off Toggling visibility of ids for all/only configured elements 這三個... |
發表人: | Sheng [ 2006-02-19, 23:34 ] |
文章主題 : | |
1.I don't use this extension yet ,having no idea.But I guess that means when you command (via enter the id) to scroll page, how many pixels it will scroll. 2.You can configure for which page elements you would like to see the ids(a unique number for every elements). By default all ids are visible. You can toggle the visibility of the ids by configurable shortcuts; you can switch off/on the ids, enable them only when needed. any way 1. It's not compatible with Fx 1.07 2. I don't seem to see the config about "scrolling pixels" |
發表人: | Sheng [ 2006-02-20, 00:20 ] |
文章主題 : | |
I find and install the previous version. Any way 1.try to press "+" or "-" (or other short key like Pageup / Pagedown) to scroll page then change the figure from 300 to 10000 and scroll page again -> you will get it! So you can translate it to "按下捷徑時頁面捲動的象素" 2.This function is for select to show/disable all/partial ids So you can translate it to "顯示元件代碼" "顯示全部或指定的元件代碼" *Depands on how you what to identify the word "id" |
發表人: | froce [ 2006-02-20, 01:11 ] | ||
文章主題 : | |||
感謝... 雖然Toggling visibility of ids for all/only configured elements我還是不知道要怎麼用... 連鍵盤設定的按鍵顯示也盡量用標示來取代... 不過因為程式的關係...所以用的是全形符號... 數字鍵盤那邊的則是為了識別...用的是半形符號...
|
發表人: | coolcd [ 2006-02-20, 01:24 ] |
文章主題 : | |
話說這一類鍵盤快捷的套件,最怕的就是停止發展... 一旦習慣成自然,要改會很煩。 以前也出現過類似的套件: Numbered Link 跟 Conkeror 1.0 的時代可以用,但現在... 不知道,有興趣研究的可以試試。 目前這套件看起來還不錯,希望以後也不錯。 (沒有唱衰這個套件的意思... 只是有感而發,別誤會哦) |
發表人: | froce [ 2006-02-20, 01:40 ] |
文章主題 : | |
coolcd 寫: 話說這一類鍵盤快捷的套件,最怕的就是停止發展...
一旦習慣成自然,要改會很煩。 以前也出現過類似的套件: Numbered Link 跟 Conkeror 1.0 的時代可以用,但現在... 不知道,有興趣研究的可以試試。 目前這套件看起來還不錯,希望以後也不錯。 (沒有唱衰這個套件的意思... 只是有感而發,別誤會哦) 嗯...我也希望不要停止開發... 目前最希望的是可以記憶上次瀏覽器關閉時編號的顯示狀態... 0.4版沒這功能... 不過我主要還是用滑鼠來上網啦... 要我都用鍵盤應該是不太可能... |
發表人: | Sheng [ 2006-02-20, 07:51 ] |
文章主題 : | |
froce 寫: 感謝...
雖然Toggling visibility of ids for all/only configured elements我還是不知道要怎麼用... Press "DECIMAL" (The key also is located in Num pad, ".") |
發表人: | froce [ 2006-02-20, 13:11 ] |
文章主題 : | |
Sheng 寫: froce 寫: 感謝... 雖然Toggling visibility of ids for all/only configured elements我還是不知道要怎麼用... Press "DECIMAL" (The key also is located in Num pad, ".") 我是問"ctrl+."... 這個功能我真的不知道要怎麼用... |
發表人: | Sheng [ 2006-02-20, 13:46 ] |
文章主題 : | |
Call Options of Mouseless Browsing to configure, Go to "General" Tab, See the frame "Visiblity of ids" Check/uncheck any of these four options (Enable ids for ...) Go back to browse a page And you will see some of target type of ids become disable. THEN, try to press decimal key, and [ctrl]+[decimal], See the change? ![]() |
發表人: | froce [ 2006-02-20, 15:32 ] |
文章主題 : | |
Sheng 寫: Call Options of Mouseless Browsing to configure,
Go to "General" Tab, See the frame "Visiblity of ids" Check/uncheck any of these four options (Enable ids for ...) Go back to browse a page And you will see some of target type of ids become disable. THEN, try to press decimal key, and [ctrl]+[decimal], See the change? ![]() 喔...原來是這樣...@@a |
發表人: | fang5566 [ 2006-02-20, 19:31 ] |
文章主題 : | |
id是什么意思呢 能说明一下么 谢谢 |
發表人: | Sheng [ 2006-02-20, 19:38 ] |
文章主題 : | |
fang5566 寫: id是什么意思呢 能说明一下么 谢谢
簡單的說,你在網頁上看到他為每個物件旁邊標上的數字 |
發表人: | Sheng [ 2006-02-20, 20:09 ] |
文章主題 : | |
嗯,我發現這套件唯一帶給我的困擾是 或多或少的和隨打即找發生衝突 所以我必須取捨,關掉其中一個功能 |
發表人: | 1394 [ 2006-03-31, 14:25 ] |
文章主題 : | |
Sheng 寫: 嗯,我發現這套件唯一帶給我的困擾是
或多或少的和隨打即找發生衝突 所以我必須取捨,關掉其中一個功能 我在我的筆記型電腦上有安裝相當的好用,多謝你的介紹 還有你說的問題,我是把隨打即找關閉要使用時在輸入 ?/ 這一個按鍵,這是隨打即找的器動鍵,這樣使用沒問題 PS.不是數字鍵的那一個/ |
發表人: | Sheng [ 2006-03-31, 17:09 ] |
文章主題 : | |
1394 寫: Sheng 寫: 嗯,我發現這套件唯一帶給我的困擾是 或多或少的和隨打即找發生衝突 所以我必須取捨,關掉其中一個功能 我在我的筆記型電腦上有安裝相當的好用,多謝你的介紹 還有你說的問題,我是把隨打即找關閉要使用時在輸入 ?/ 這一個按鍵,這是隨打即找的器動鍵,這樣使用沒問題 PS.不是數字鍵的那一個/ 不太瞭解? 我打?或/都會跑出搜尋列,它會以為我要找/或?這個字 |
第 1 頁 (共 1 頁) | 所有顯示的時間為 UTC + 8 小時 |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |